Asterisk

DIDX provides simple call forwarding Service, does not offer SIP or IAX2 accounts (PEERS) to register on our network.

Which means that you must allow DIDX to send you calls on your asterisk server from our IP Addresses.

Our IP Address are:

IP Address DNS
167.99.13.125 sip.didx.net
162.243.32.115 sip4.didx.net
67.228.182.162 sip8.didx.net
142.93.9.107 sip10.didx.net
159.203.27.198 ca.didx.net
188.166.168.173 eu2.didx.net
46.101.80.13 eu3.didx.net
198.199.87.53 us1.didx.net
162.243.107.173 us2.didx.net

You should be able to receive calls from DIDX over sip or iax2
Asterisk Sample Configurations

Sample sip.conf  
Sample extensions.conf  
Sample iax.conf

To learn how to change Forwarding Settings Click Here
To Learn more about Other DIDX Features visit /school

 

SIP.Conf Sample  File Location: /etc/asterisk/sip.conf

Since the call is going to you over GENERAL Context, you will need to add the following lines to make your asterisk work with DIDX properly. Otherwise you will face errors and will think that DID is not working.

We will explain below why you need to add each particular line.

[general]  
context=default ; This is very important, as this is where the call from DIDX will land to. If the context does not exist in your extensions.conf the call will not come to your asterisk, and will return “404 not found” to DIDX, very common error at our end.

port=5060 ; The port where DIDX sends the call to. For sending calls on a different port.

bindaddr=X.X.X.X ; Please bind to your main IP address that you are using.

srvlookup=yes ; Enable DNS SRV lookups on outbound calls

dtmfmode=rfc2833 ; If you need DTMF and you do not have this line, there may be errors in getting DTMF from DIDX.

relaxdtmf=no

disallow=all ; Disallow all codecs  
allow=ulaw ; Required for DTMF  
allow=alaw ; Required for DTMF

allow=g729  
allow=gsm

maxexpirey=30  
defaultexpirey=180  
canreinvite=yes  
nat=0  
UserAgent= Asterisk  
echocancel=yes  
echocancelwhenbridge=yes

[1000] ;A Sip User – Nothing to do with DIDX  
type=friend  
username=12126559343

Notice that there is no registration information of ours on your server, because we do not require you to register any users / peers on our network. We use standard SIP and IAX2 forwarding.

IAX.conf  /etc/asterisk/iax.conf

[general]  
bindport=4569  
bindaddr=0.0.0.0 ; Your server ip address  
jitterbuffer = yes  
disallow=all  
allow=alaw  
allow=ulaw  
dtmfmode = rfc2833 ; To get DTMF Properly from DIDX  
context=Default ; This is where your call will land to if you do not  
send it to a user IE  
[asterisk@yourdomain.com/1111111111](mailto:asterisk@yourdomain.com/1111111111)

allow=all ; Codec which you want to use for DIDX

[guest]  
Context=default ;Where you want the calls to go into from DIDX if u send it to [guest:guest@domain.com/12126555763](mailto:guest:guest@domain.com/12126555763)

Disallow= all  
Allow= ulaw;Codec on which calls will come to your asterisk server  
dtmfmode= rfc2833 ; To get DTMF Properly from DIDX

Notice that there is no registration information of ours on your server, because we do not require you to register any users / peers on our network, we use standard SIP and IAX2 forwarding and the calls are going to land on your guest user, or you can land them to any other user of your own.

Extensions.conf  /etc/asterisk/extensions.conf

Extensions.conf has to know where the call you are getting from has to go to.

We are going to assume that you are using context didx where you want to send your calls to

[didx]  
exten = _X.,1,Dial(SIP/123456@fwd.pulver.com)  
exten = _X.,2,Hangup

This will send all the calls to the freeworlddialup account number 123456

This is just a SAMPLE for you to go ahead and configure it properly.

Trouble Shooting your problems of call not coming to your asterisk

Most of the time we get request that the call is not going though, or voice is not coming on the did, this is why we give 2 FREE did’s so that before you attempt to buy anything, you can check the setup at your and our end, this helps us trouble shoot the problem.

Whenever you have a problem with any did number, you should first use the free did to test the same problem, because the problem can be at providers end also, but the free did’s are toughly tested before we give them to you.

Playing a MP3 file from your server:
Playing a MP3 file from your server will help you easily detect some of the errors, simply enter this code in your extensions.conf default contact defined in your general sip.conf section.

exten = radio,1,Answer  
exten = radio,2,MP3Player(="//jesus.mp3)

then send the call from didx to your server to radio@yourdomain.com or radio@yourip

This will play a song on the phone, and will show that the call is going through fine to your asterisk.

Support

We recommend you to visit

About Us
Voip Information

If you are still having problems, We suggest you contact an asterisk consultant, or best would be to contact www.Digium.com

SignIn to your DIDX Account

Forgot Password?


Don't have an account? Signup Now